Bosch · Dishwasher
WGG254Z1GB
Series 6 AntiStain 10kg 1400rpm
Series 6
2022+
25
Compatible Spare Parts
detergent (3)
Dispenser tray
OEM: 00742721
# Dispenser Tray for Bosch Dishwashers When your dishwasher fails to dispense detergent properly or the tray won't close securely, the dispenser mechanism has likely worn out or cracked. This genuine Bosch dispenser tray (OEM reference 00742721) is the perfect replacement to restore your dishwasher's cleaning performance and get it working reliably again. Over time, the plastic dispenser tray becomes brittle and may crack or break, preventing detergent from releasing at the right moment during the wash cycle. This original part ensures your machine operates exactly as Bosch intended, delivering detergent at the optimal time for superior cleaning results. Installation is straightforward and rated at difficulty level 2, making it ideal for confident DIY homeowners. When fitting the new tray, take a moment to clean the surrounding housing area of any detergent residue or debris, as this helps ensure a perfect fit and smooth operation going forwards. Before ordering, please verify your dishwasher's E-Nr model number on the appliance rating plate and cross-reference it with the compatibility information. This simple check guarantees you're purchasing the correct part for your specific Bosch model.
Dispenser tray-lower part
OEM: 00742720
# Dispenser Tray-Lower Part If your Bosch dishwasher isn't dispensing detergent properly or you've noticed cracks and wear around the detergent compartment, this lower dispenser tray is likely the culprit. Over time, the mechanism that holds and releases your washing powder or tablets can deteriorate, affecting the effectiveness of your wash cycles. This OEM replacement part (reference 00742720) restores full functionality to your detergent dispensing system, ensuring your dishes come out properly cleaned every time. Installation is straightforward and rates at difficulty level 2, making it an ideal weekend project for most homeowners. When fitting the new tray, take a moment to inspect the surrounding components for any additional wear or damage. This simple check can save you from future problems and ensure everything works harmoniously together. The whole job typically takes less than 30 minutes, even if you're tackling appliance repairs for the first time. Before placing your order, do verify your dishwasher's E-Nr model number matches this part's compatibility. You'll find this information on your machine's documentation or inside the door edge, ensuring you receive exactly what you need.
Dispenser tray-upper part
OEM: 00659869
# Dispenser Tray-Upper Part If your Bosch dishwasher isn't dispensing detergent properly or the dispenser door won't close as it should, the upper part of the dispenser tray may have worn out or failed. This component is essential for holding and releasing your washing powder or tablets at the right moment during the cycle. Replacing this part is straightforward and requires minimal DIY experience. The official part number is 00659869, making it easy to order the correct replacement. Installation difficulty is rated at level 2, meaning most homeowners can complete this job in under 30 minutes with just basic tools. A useful tip when installing: before sliding the new tray into position, ensure the spring mechanism is properly aligned so it won't catch on the surrounding components. This prevents frustrating installation delays and potential damage. This replacement will restore your dishwasher's detergent dispensing reliability and help ensure spotlessly clean dishes once again. Before ordering, please verify your machine's E-Nr model number matches this part's compatibility, as different Bosch models may require variations.
hose (9)
Hose
OEM: 11054121
# Bosch Dishwasher Hose (11054121) Water leaks or inadequate drainage in your Bosch dishwasher usually point to a worn or damaged hose. Over time, these rubber components deteriorate due to water pressure, temperature fluctuations, and general wear, eventually cracking or perishing and causing pooling water inside your appliance or beneath it. This genuine OEM hose (reference 11054121) restores proper water circulation and drainage, getting your dishwasher back to full working order. The installation difficulty rating of 2 means most confident DIYers can handle this job without professional help. When fitting the replacement, ensure you disconnect the power supply and turn off the water inlet before removing the old hose. Take a moment to inspect the connection points for any debris or mineral buildup, cleaning them gently with a cloth before attaching the new hose. This simple step prevents future leaks and ensures a secure seal. Please verify your dishwasher's E-Nr model number matches our compatibility information before ordering, as Bosch produced numerous variants across their range and using the correct part is essential.
Hose
OEM: 00633964
# Bosch Dishwasher Hose (00633964) Water leaks or reduced water flow in your Bosch dishwasher are often caused by a worn or damaged hose. Over time, these components can crack, split, or deteriorate, compromising your machine's ability to fill and drain properly. Replacing a faulty hose is one of the most effective ways to restore your dishwasher to full working order. This genuine OEM hose (reference 00633964) is designed specifically for Bosch dishwashers and offers reliable performance with a straightforward installation. The job is rated as difficulty level 2, meaning most DIY homeowners can tackle it with basic tools and a little patience. Before you begin, we recommend taking a photograph of your current hose setup to help guide reassembly. This simple step prevents confusion when reconnecting everything and ensures a watertight fit. Stock this genuine replacement hose today and get your dishwasher back in action. However, before placing your order, please verify the E-Nr model number on your appliance matches the compatibility information for this part. You'll find this number on your dishwasher's rating plate.
Hose clamp
OEM: 00187337
# Hose Clamp for Bosch & Siemens Dishwashers Water leaks or loose hose connections in your dishwasher are often caused by a worn or damaged hose clamp. Over time, the clamp loses its grip, allowing water to escape and potentially damaging your kitchen. This genuine replacement hose clamp (OEM reference 00187337) restores a secure seal and prevents further water damage to your appliance and home. This part is compatible with most Bosch and Siemens dishwasher models and is straightforward to install, with a difficulty rating of just 2 out of 10. Most homeowners can complete the replacement in under an hour with basic tools. When installing, ensure you position the clamp so the tightening mechanism faces downwards or to the side—this makes it easier to access when you need to service the hose later. Always turn off the water supply before beginning work to avoid spillage. Before ordering, verify the E-Nr model number on your dishwasher's documentation or inside the door edge. This ensures perfect compatibility and a trouble-free replacement that restores your appliance to full working order.
Hose clamp
OEM: 00422207
# Hose Clamp for Bosch Dishwashers Water leaks around your dishwasher's hose connections are often caused by a worn or failed hose clamp. Over time, these metal fasteners can corrode, weaken, or lose their grip, allowing water to escape during the wash cycle. Replacing a faulty clamp is a straightforward solution that prevents water damage to your kitchen and restores your appliance's reliability. This genuine OEM hose clamp (reference 00422207) is designed specifically for Bosch dishwashers and provides a secure seal on inlet and outlet hoses. The installation difficulty is rated at just 2 out of 10, making it an ideal DIY job for most homeowners. When fitting the replacement, ensure you position the clamp's screw mechanism on the side or bottom of the hose connection rather than the top, which makes future adjustments easier and prevents the screw from catching on cabinet edges. Before ordering, please verify your dishwasher's E-Nr model number, which you'll find on the appliance's identification plate inside the door edge. This confirms compatibility and ensures you receive the correct part for your specific model.
Hose clamp
OEM: 00422206
# Hose Clamp for Bosch Dishwashers If your Bosch dishwasher is leaking water or you've noticed loose hose connections, a worn hose clamp is likely the culprit. Over time, these small but essential components deteriorate due to constant pressure and temperature changes, causing hoses to slip and water to escape where it shouldn't. This genuine replacement hose clamp, reference 00422206, is designed specifically for Bosch dishwashers and restores a secure seal between your water inlet and drainage hoses. It's a straightforward repair that most confident DIY homeowners can tackle, with an installation difficulty rating of just 2 out of 10. When fitting the new clamp, ensure the hose is properly positioned before tightening. Gradually increase pressure rather than over-tightening in one go, which can crack plastic fittings. A gentle, steady approach takes just a few minutes and prevents accidental damage. This is a genuine OEM part that guarantees compatibility and reliability with your machine. Before ordering, please verify your dishwasher's E-Nr model number matches our compatibility list to ensure you're getting the correct component for your specific model.
Hose-fill
OEM: 12042721
# Bosch Dishwasher Fill Hose (12042721) If your Bosch dishwasher isn't filling with water or is leaking around the inlet area, a worn or damaged fill hose is likely the culprit. Over time, these hoses deteriorate due to water pressure, temperature fluctuations, and general wear, eventually causing performance issues or water damage beneath your appliance. The OEM reference 12042721 is a genuine Bosch replacement hose designed to restore reliable water supply to your dishwasher. Installation is straightforward, rated at difficulty level 2, making it an ideal DIY project for most homeowners. Simply turn off the water supply, disconnect the old hose from both the inlet valve and water tap connection, then reverse the process with your new part. A helpful tip: when reconnecting, ensure you hand-tighten the compression fittings firmly but don't over-tighten, as this can damage the threads. Use a small amount of plumber's tape on threaded connections for a watertight seal. This part suits various Bosch dishwasher models. Before ordering, please verify your appliance's E-Nr model number, which you'll find on the manufacturers label inside your machine, to confirm compatibility.
Hose-pressure chamber
OEM: 00634603
# Hose-Pressure Chamber for Bosch Dishwashers When your Bosch dishwasher fails to clean properly or stops mid-cycle, a worn pressure chamber hose could be the culprit. This essential component regulates water pressure throughout your appliance, and general wear over time can cause leaks, reduced performance, or complete breakdown. Replacing the hose-pressure chamber (OEM reference 00634603) is a straightforward fix that most confident DIY homeowners can tackle in under an hour. With an installation difficulty rating of just 2 out of 10, you'll need only basic tools and a bit of patience. Before you start, locate your dishwasher's drainage point to catch any residual water. This simple precaution saves mess and protects your kitchen floor. Take photos of the existing hose connections before removal, so you can reconnect everything correctly. This genuine replacement part restores proper water pressure, ensuring your dishwasher performs like new. It's a cost-effective solution that extends your appliance's lifespan considerably. Before ordering, please verify your dishwasher's E-Nr model number matches this part's compatibility to ensure correct fitment.
Outlet hose
OEM: 11055313
# Bosch Dishwasher Outlet Hose (11055313) Water pooling inside your dishwasher or leaking beneath it usually means the outlet hose has worn out or split. This hose is responsible for safely draining away dirty water after each cycle, so when it fails, your appliance quickly becomes unusable. The genuine Bosch outlet hose (OEM reference 11055313) is a straightforward replacement for worn or damaged models. Installation is straightforward, rated at difficulty level 2, making it an ideal project for most DIY homeowners. You'll typically need just a few minutes and basic tools to disconnect the old hose and secure the new one in place. A useful tip: before tightening the hose connections, run your finger inside the connection points to check for any debris or cracks that could cause future leaks. This simple check prevents problems down the line. This part directly addresses general wear and failure that occurs naturally over time. Whether your hose has developed cracks, split completely, or simply lost its seal, replacing it should restore proper drainage. Before ordering, please verify your dishwasher's E-Nr model number matches this part's compatibility to ensure correct fitment.
Outlet hose
OEM: 11020709
# Bosch Dishwasher Outlet Hose (11020709) Water pooling around your dishwasher or refusing to drain properly? A worn or damaged outlet hose is likely the culprit. Over time, these hoses can crack, perish, or become blocked, preventing water from flowing away during the wash cycle. Replacing it will restore your dishwasher's drainage and prevent potential water damage to your kitchen. This genuine Bosch replacement hose (OEM reference 11020709) is designed specifically for Bosch dishwashers and offers a straightforward repair that most competent DIY homeowners can handle. With an install difficulty rating of just 2 out of 10, you'll simply need to disconnect the old hose from the pump outlet and reattach the new one using the existing clips and connections. A helpful tip: before removing the old hose, place a towel underneath to catch any residual water trapped inside. This prevents spills across your kitchen floor and makes the job much cleaner. Please verify your dishwasher's E-Nr model number matches our compatibility information before ordering to ensure this is the correct part for your appliance.
other (7)
Accessory holder
OEM: 00605740
# Bosch Dishwasher Accessory Holder When your dishwasher's accessory holder becomes loose, cracked or simply won't stay in place, it's time for a replacement. This essential component keeps cutlery baskets and utensils securely positioned during the wash cycle, preventing rattling and ensuring proper water circulation around your dishes. This genuine Bosch accessory holder (OEM reference 00605740) is designed to restore your dishwasher to full working order. Over time, wear and tear can compromise the integrity of the holder, leading to instability or complete failure. Replacing it is a straightforward task that most DIY homeowners can tackle confidently. The installation difficulty rating of 2 means you'll need basic tools and about 15-20 minutes of your time. Before you start, ensure the dishwasher is unplugged from the mains supply for safety. The holder simply slides into position, but take care to align it properly with the mounting points to avoid future issues. Please verify your dishwasher's E-Nr model number matches this part before ordering to guarantee compatibility with your specific Bosch appliance.
Ball-sump
OEM: 10014683
# Ball-sump for Bosch Dishwashers If your Bosch dishwasher isn't draining properly or you're noticing water pooling at the bottom, a worn ball-sump is often the culprit. This small but essential component manages water flow through your dishwasher's drainage system and can fail over time through normal wear and tear. Replacing the ball-sump (OEM reference 10014683) is a straightforward repair that most DIY homeowners can tackle themselves. The installation difficulty rating of 2 means you'll need basic mechanical confidence, but no specialist knowledge. You'll typically need to access the sump from underneath the dishwasher, so ensure you've disconnected the power supply and turned off the water inlet first. Here's a practical tip: before fitting the new ball-sump, take a moment to clean out any debris from the surrounding drainage area. Built-up food particles and limescale can prevent the new component from working effectively. This part should resolve general wear-related drainage issues and restore your dishwasher's performance. Before ordering, verify your machine's E-Nr model number matches our compatibility list to ensure you're getting the correct replacement.
Container return
OEM: 12044301
# Bosch Dishwasher Container Return When your dishwasher's detergent dispenser fails to function properly or the container won't stay securely in place, it's time to replace the container return. This small but essential component ensures your dishwasher releases detergent at the right moment during the wash cycle, directly affecting cleaning performance. The container return (OEM reference 12044301) is a genuine Bosch part designed to withstand thousands of wash cycles. Over time, wear and tear can cause it to crack, warp, or lose its grip, preventing proper detergent dispensing. Replacing it restores your dishwasher to full working order. Installation difficulty sits at level 2, making this a straightforward job for most DIY homeowners. When fitting the new part, ensure it clicks firmly into position until you hear a satisfying snap—this confirms it's properly seated and won't come loose during operation. This part is compatible with a range of Bosch dishwashers, but compatibility varies by model. Before ordering, please verify your appliance's E-Nr model number, which you'll find on the identification plate inside your dishwasher door. This ensures you receive the correct part for your specific machine.
Holder
OEM: 00634599
# Bosch Dishwasher Holder (00634599) If your Bosch dishwasher isn't holding items securely during the wash cycle, or you've noticed loose components rattling around inside, a worn or damaged holder could be the culprit. Over time, these hardworking parts experience general wear and eventual failure, compromising your appliance's performance. This genuine OEM replacement holder (reference 00634599) restores proper functionality and ensures your dishes stay exactly where they should be throughout the cycle. Installation difficulty sits at level 2, making this a straightforward job for most confident DIY homeowners. Before you start, ensure you've switched off the power at the mains for safety. The holder typically clips into place, so apply steady pressure when seating it fully – you'll hear a satisfying click when it's properly secured. Take a moment to verify it's completely flush before closing up the dishwasher. This is a genuine Bosch part, guaranteeing compatibility and longevity with your appliance. Always check your dishwasher's E-Nr model number against our compatibility list before ordering to ensure you receive the correct replacement.
Set
OEM: 00425075
# Bosch Dishwasher Set (00425075) Is your Bosch dishwasher showing signs of general wear and failure? A worn or damaged internal set could be the culprit, affecting your appliance's performance and reliability. This genuine OEM replacement set, reference 00425075, restores your dishwasher to full working order and prevents further complications down the line. This is a straightforward repair that most confident DIY homeowners can manage. With an installation difficulty rating of just 2 out of 10, you'll have your dishwasher back up and running in no time. Before you begin, make sure to unplug your appliance from the power supply—this simple precaution keeps you safe throughout the job and is worth the extra minute it takes. The set is designed specifically for Bosch dishwashers and uses quality materials built to last. Replacing worn components now saves you from more expensive repairs later and extends your appliance's lifespan considerably. Before ordering, please verify your dishwasher's E-Nr model number matches this part's compatibility. You'll find this number on your appliance's documentation or inside the door frame. This ensures you receive the correct replacement for your specific model.
Siphon-device
OEM: 00627086
# Bosch Dishwasher Siphon Device (00627086) If your Bosch dishwasher isn't draining properly or water is backing up into the tub, a faulty siphon device is often the culprit. This small but essential component prevents siphoning action that could damage your machine or create unpleasant odours. Over time, wear and general failure can compromise its ability to function correctly, leaving you with a dishwasher that won't empty between cycles. Replacing the siphon device (OEM reference 00627086) is a straightforward repair that most DIY homeowners can tackle. With an installation difficulty rating of just 2, you'll have your dishwasher working again without calling an engineer. The job typically takes under an hour. Here's a practical tip: before starting, take a photo of the hose connections to the siphon device. This simple reference will make reassembly much easier and ensures you don't mix up the inlet and outlet positions. This spare part is specifically designed for Bosch dishwashers, so compatibility is guaranteed. Before ordering, please verify your appliance's E-Nr model number matches our compatibility list to ensure you're purchasing the correct component.
fastening ring
OEM: 00603523
# Bosch Dishwasher Fastening Ring (00603523) If your Bosch dishwasher is experiencing general wear or has stopped working reliably, a worn or failed fastening ring could be the culprit. This essential component holds critical parts securely in place, and when it deteriorates, it can cause performance issues throughout your appliance. The fastening ring, OEM reference 00603523, is a straightforward replacement that most DIY homeowners can tackle. With an installation difficulty rating of just 2 out of 10, you won't need extensive technical knowledge or specialist tools. The job typically takes under an hour, making it an ideal weekend project. When installing your new fastening ring, ensure the surrounding components are clean and dry before securing everything in place. This simple step prevents future alignment problems and extends the lifespan of your repair. This spare part is designed specifically for Bosch dishwashers and will restore proper function when general wear has compromised the original. Before ordering, please verify your dishwasher's E-Nr model number matches this part's compatibility to guarantee it's the correct replacement for your machine.
valve (2)
Hose-inlet
OEM: 12036158
# Bosch Dishwasher Inlet Hose Valve Is your Bosch dishwasher failing to fill with water or leaking around the inlet connection? A worn or damaged inlet hose valve could be the culprit. This component controls water flow into your dishwasher and gradually deteriorates with use, eventually leading to complete failure or persistent drips beneath your appliance. The OEM reference 12036158 is the genuine Bosch replacement valve designed to restore proper water intake functionality. Installation is straightforward, rated at difficulty level 2, making this an ideal DIY repair for most homeowners. You'll typically need just a spanner and perhaps a bucket to catch any residual water. Before you begin, turn off the water supply at the tap and allow the dishwasher to drain completely. This simple precaution prevents unnecessary spillage and makes the job considerably cleaner. The valve itself connects via compression fittings, so hand-tightening followed by a quarter-turn with your spanner should secure it perfectly. Please verify your dishwasher's E-Nr model number matches this part's compatibility before ordering, as Bosch produced several variants throughout their product range.
Valve-magnet
OEM: 10032419
# Valve-Magnet for Bosch Dishwashers If your Bosch dishwasher isn't filling with water or is leaking unexpectedly, a faulty valve-magnet could be the culprit. Over time, this essential component wears out and loses its ability to control water flow properly, leaving you with a machine that simply won't operate as it should. This genuine replacement valve-magnet (OEM reference 10032419) restores reliable water control to your dishwasher, getting it back to peak performance. Installation is straightforward, rated at difficulty level 2, meaning most confident DIY homeowners can handle it themselves with basic tools. Before you begin, locate your dishwasher's water inlet valve assembly, usually found beneath the machine. Take a photo of the old component before removal to ensure you're installing the new one correctly. This small step prevents confusion during reassembly and saves frustrating mistakes. This valve-magnet addresses general wear and failure issues that develop after years of regular use. It's a cost-effective solution that extends your appliance's lifespan significantly. Please verify your dishwasher's E-Nr model number matches this part before ordering, as Bosch produces many variations. You'll find this number on your machine's data plate inside the door edge.
⚠ Compatibility notice
Always verify your exact model number (E-Nr) on your appliance rating plate before ordering.