Why is my Bosch washing machine not spinning?
A Bosch washing machine that won't spin usually stops at the rinse or final stage. This is often fixable without calling an engineer. Check these common causes first.
Most likely causes
- 25% Too many clothes prevent the drum from rotating freely.
- 20% The machine won't spin if it thinks the door is open.
- 20% Debris prevents water draining, triggering a safety stop.
- 18% A worn or snapped belt stops the drum rotating.
- 10% The motor that powers spinning has failed internally.
- 7% Electronic failure prevents the spin cycle command from executing.
How to diagnose it
- 1
Check the load size
Open the door and remove some clothes if the drum is packed. Run a spin cycle on an empty drum to test.
- 2
Inspect the door latch
Close the door firmly and listen for a click. If there's no click, the latch may be broken or misaligned.
- 3
Clean the pump filter
Turn off and unplug the machine. Locate the filter (usually bottom front) and unscrew it to remove debris and coins.
- 4
Run a diagnostic cycle
Plug the machine back in and run a spin-only cycle. If it spins now, the problem was the filter or overloading.
- 5
Check for error codes
Look at the display panel for any fault codes. Write down any codes and check your manual or contact Bosch support.
- 6
Listen for unusual sounds
Run the machine and listen for grinding, squealing, or silence during the spin cycle. These indicate motor or belt issues.
- 7
Book an engineer visit
If none of the above work, you likely need a belt or motor replacement. Contact Bosch or a qualified technician.