Spare parts category
hose
hose spare parts for Bosch and Siemens dishwashers. All 20 parts have verified OEM compatibility data.
20 parts · All OEM-verified
Hose clamp
OEM: 00187337
# Hose Clamp for Bosch & Siemens Dishwashers Water leaks or loose hose connections in your dishwasher are often caused by a worn or damaged hose clamp. Over time, the clamp loses its grip, allowing water to escape and potentially damaging your kitchen. This genuine replacement hose clamp (OEM reference 00187337) restores a secure seal and prevents further water damage to your appliance and home. This part is compatible with most Bosch and Siemens dishwasher models and is straightforward to install, with a difficulty rating of just 2 out of 10. Most homeowners can complete the replacement in under an hour with basic tools. When installing, ensure you position the clamp so the tightening mechanism faces downwards or to the side—this makes it easier to access when you need to service the hose later. Always turn off the water supply before beginning work to avoid spillage. Before ordering, verify the E-Nr model number on your dishwasher's documentation or inside the door edge. This ensures perfect compatibility and a trouble-free replacement that restores your appliance to full working order.
Compatible with 3 models
Hose
OEM: 00633964
# Bosch Dishwasher Hose (00633964) Water leaks or reduced water flow in your Bosch dishwasher are often caused by a worn or damaged hose. Over time, these components can crack, split, or deteriorate, compromising your machine's ability to fill and drain properly. Replacing a faulty hose is one of the most effective ways to restore your dishwasher to full working order. This genuine OEM hose (reference 00633964) is designed specifically for Bosch dishwashers and offers reliable performance with a straightforward installation. The job is rated as difficulty level 2, meaning most DIY homeowners can tackle it with basic tools and a little patience. Before you begin, we recommend taking a photograph of your current hose setup to help guide reassembly. This simple step prevents confusion when reconnecting everything and ensures a watertight fit. Stock this genuine replacement hose today and get your dishwasher back in action. However, before placing your order, please verify the E-Nr model number on your appliance matches the compatibility information for this part. You'll find this number on your dishwasher's rating plate.
Compatible with 2 models
Hose clamp
OEM: 00422206
# Hose Clamp for Bosch Dishwashers If your Bosch dishwasher is leaking water or you've noticed loose hose connections, a worn hose clamp is likely the culprit. Over time, these small but essential components deteriorate due to constant pressure and temperature changes, causing hoses to slip and water to escape where it shouldn't. This genuine replacement hose clamp, reference 00422206, is designed specifically for Bosch dishwashers and restores a secure seal between your water inlet and drainage hoses. It's a straightforward repair that most confident DIY homeowners can tackle, with an installation difficulty rating of just 2 out of 10. When fitting the new clamp, ensure the hose is properly positioned before tightening. Gradually increase pressure rather than over-tightening in one go, which can crack plastic fittings. A gentle, steady approach takes just a few minutes and prevents accidental damage. This is a genuine OEM part that guarantees compatibility and reliability with your machine. Before ordering, please verify your dishwasher's E-Nr model number matches our compatibility list to ensure you're getting the correct component for your specific model.
Compatible with 2 models
Hose-pressure chamber
OEM: 00634603
# Hose-Pressure Chamber for Bosch Dishwashers When your Bosch dishwasher fails to clean properly or stops mid-cycle, a worn pressure chamber hose could be the culprit. This essential component regulates water pressure throughout your appliance, and general wear over time can cause leaks, reduced performance, or complete breakdown. Replacing the hose-pressure chamber (OEM reference 00634603) is a straightforward fix that most confident DIY homeowners can tackle in under an hour. With an installation difficulty rating of just 2 out of 10, you'll need only basic tools and a bit of patience. Before you start, locate your dishwasher's drainage point to catch any residual water. This simple precaution saves mess and protects your kitchen floor. Take photos of the existing hose connections before removal, so you can reconnect everything correctly. This genuine replacement part restores proper water pressure, ensuring your dishwasher performs like new. It's a cost-effective solution that extends your appliance's lifespan considerably. Before ordering, please verify your dishwasher's E-Nr model number matches this part's compatibility to ensure correct fitment.
Compatible with 2 models
Outlet hose
OEM: 11020709
# Bosch Dishwasher Outlet Hose (11020709) Water pooling around your dishwasher or refusing to drain properly? A worn or damaged outlet hose is likely the culprit. Over time, these hoses can crack, perish, or become blocked, preventing water from flowing away during the wash cycle. Replacing it will restore your dishwasher's drainage and prevent potential water damage to your kitchen. This genuine Bosch replacement hose (OEM reference 11020709) is designed specifically for Bosch dishwashers and offers a straightforward repair that most competent DIY homeowners can handle. With an install difficulty rating of just 2 out of 10, you'll simply need to disconnect the old hose from the pump outlet and reattach the new one using the existing clips and connections. A helpful tip: before removing the old hose, place a towel underneath to catch any residual water trapped inside. This prevents spills across your kitchen floor and makes the job much cleaner. Please verify your dishwasher's E-Nr model number matches our compatibility information before ordering to ensure this is the correct part for your appliance.
Compatible with 2 models
Outlet hose
OEM: 11055313
# Bosch Dishwasher Outlet Hose (11055313) Water pooling inside your dishwasher or leaking beneath it usually means the outlet hose has worn out or split. This hose is responsible for safely draining away dirty water after each cycle, so when it fails, your appliance quickly becomes unusable. The genuine Bosch outlet hose (OEM reference 11055313) is a straightforward replacement for worn or damaged models. Installation is straightforward, rated at difficulty level 2, making it an ideal project for most DIY homeowners. You'll typically need just a few minutes and basic tools to disconnect the old hose and secure the new one in place. A useful tip: before tightening the hose connections, run your finger inside the connection points to check for any debris or cracks that could cause future leaks. This simple check prevents problems down the line. This part directly addresses general wear and failure that occurs naturally over time. Whether your hose has developed cracks, split completely, or simply lost its seal, replacing it should restore proper drainage. Before ordering, please verify your dishwasher's E-Nr model number matches this part's compatibility to ensure correct fitment.
Compatible with 2 models
Hose
OEM: 00668104
# Bosch Dishwasher Hose (00668104) Water leaks or reduced water flow during your dishwasher's cycle? A worn or damaged hose is likely the culprit. Over time, rubber hoses can crack, split, or deteriorate from constant exposure to hot water and pressure, leaving you with puddles under the kitchen cabinet or dishes that won't clean properly. This genuine OEM hose (reference 00668104) is designed specifically for Bosch dishwashers and restores proper water circulation throughout your machine. Installation is straightforward, rated at difficulty level 2, making it an achievable DIY project for most homeowners. When fitting the new hose, remember to position it away from sharp edges or moving parts inside the dishwasher cavity. This simple precaution prevents premature wear on your replacement and ensures longevity. You'll also want to double-check all connection points are secure to avoid future leaks. This hose addresses general wear and failure issues caused by age and regular use. Before ordering, verify your dishwasher's E-Nr model number matches the compatibility information, as different Bosch models may require different hose specifications.
Compatible with 1 model
Hose
OEM: 00702597
# Siemens Dishwasher Hose (00702597) When your Siemens dishwasher fails to drain properly or develops leaks beneath the unit, a worn or damaged hose is often the culprit. Over time, inlet and outlet hoses deteriorate due to water pressure, temperature fluctuations, and general wear, eventually causing failures that can damage your kitchen. This genuine replacement hose (OEM reference 00702597) restores your dishwasher's drainage and water supply to factory specifications. It's a straightforward repair suited to confident DIY homeowners, with an installation difficulty rating of 2 out of 5. Before starting work, locate the access panel beneath or behind your dishwasher and have towels ready to catch residual water. The most important tip is to photograph the existing hose connections before disconnection, ensuring you reconnect the replacement correctly. This part is compatible with various Siemens dishwasher models. To guarantee compatibility and avoid ordering errors, please verify your appliance's E-Nr model number (found on the inner door edge or side panel) matches our specification before placing your order.
Compatible with 1 model
Hose
OEM: 11054121
# Bosch Dishwasher Hose (11054121) Water leaks or inadequate drainage in your Bosch dishwasher usually point to a worn or damaged hose. Over time, these rubber components deteriorate due to water pressure, temperature fluctuations, and general wear, eventually cracking or perishing and causing pooling water inside your appliance or beneath it. This genuine OEM hose (reference 11054121) restores proper water circulation and drainage, getting your dishwasher back to full working order. The installation difficulty rating of 2 means most confident DIYers can handle this job without professional help. When fitting the replacement, ensure you disconnect the power supply and turn off the water inlet before removing the old hose. Take a moment to inspect the connection points for any debris or mineral buildup, cleaning them gently with a cloth before attaching the new hose. This simple step prevents future leaks and ensures a secure seal. Please verify your dishwasher's E-Nr model number matches our compatibility information before ordering, as Bosch produced numerous variants across their range and using the correct part is essential.
Compatible with 1 model
Hose clamp
OEM: 00172272
# Hose Clamp for Bosch Dishwashers Water leaks around your dishwasher's hose connections often indicate a worn or damaged clamp that's lost its grip. This genuine hose clamp (OEM reference 00172272) is the straightforward solution to prevent water escaping during the wash cycle and causing damage beneath your kitchen units. Over time, the metal clamp gradually loosens as your dishwasher vibrates during operation, or the band itself may crack from age and repeated use. Rather than risk water damage to your flooring or cabinets, replacing this component is a sensible preventative measure that takes just minutes to complete. The installation difficulty is rated at level 2, making this an ideal first repair for confident DIY homeowners. Before tightening the clamp onto the hose, ensure it's positioned slightly away from the actual connection joint itself, which allows for slight movement and reduces stress on both the clamp and the hose fitting. This part is compatible with Bosch dishwasher models, though it's essential you verify your appliance's E-Nr model number before ordering to confirm compatibility with your specific machine.
Compatible with 1 model
Hose clamp
OEM: 00417499
# Bosch Dishwasher Hose Clamp (00417499) Is water leaking from your Bosch dishwasher or hoses becoming loose during the cycle? A worn or failed hose clamp is often the culprit. Over time, these small but essential components can deteriorate due to constant exposure to water, heat, and pressure, causing connections to weaken and leaks to develop. This genuine OEM hose clamp (reference 00417499) secures the inlet and outlet hoses to your dishwasher, keeping everything watertight and functioning properly. Replacing it is straightforward and rated as difficulty level 2, making it an achievable DIY job for most homeowners. When installing your new clamp, ensure you position it properly over the hose barb before tightening. Apply firm pressure without over-tightening, as this can damage the hose fitting. A gentle quarter-turn past hand-tight is usually sufficient. This part addresses general wear and failure issues that develop naturally over years of use. However, before ordering, please verify your dishwasher's E-Nr model number matches the compatibility information to ensure a perfect fit for your specific Bosch model.
Compatible with 1 model
Hose clamp
OEM: 00422207
# Hose Clamp for Bosch Dishwashers Water leaks around your dishwasher's hose connections are often caused by a worn or failed hose clamp. Over time, these metal fasteners can corrode, weaken, or lose their grip, allowing water to escape during the wash cycle. Replacing a faulty clamp is a straightforward solution that prevents water damage to your kitchen and restores your appliance's reliability. This genuine OEM hose clamp (reference 00422207) is designed specifically for Bosch dishwashers and provides a secure seal on inlet and outlet hoses. The installation difficulty is rated at just 2 out of 10, making it an ideal DIY job for most homeowners. When fitting the replacement, ensure you position the clamp's screw mechanism on the side or bottom of the hose connection rather than the top, which makes future adjustments easier and prevents the screw from catching on cabinet edges. Before ordering, please verify your dishwasher's E-Nr model number, which you'll find on the appliance's identification plate inside the door edge. This confirms compatibility and ensures you receive the correct part for your specific model.
Compatible with 1 model
Hose clamp
OEM: 00621484
# Hose Clamp for Bosch Dishwashers Water leaks around your dishwasher's hoses are often caused by worn or failed hose clamps that have loosened over time. This genuine hose clamp (OEM reference 00621484) secures the inlet and drainage hoses, preventing frustrating puddles beneath your appliance and protecting your kitchen floor from water damage. Over years of use, the metal clamp gradually loses tension as vibration and temperature changes take their toll. Replacing it is a straightforward fix that most confident DIY homeowners can manage in under an hour, with an install difficulty rating of just 2 out of 10. When fitting the new clamp, ensure you turn off the water supply and place a towel underneath to catch any residual water that may spill from the hose. This simple precaution saves mess and lets you work more comfortably. This part is compatible with Bosch dishwashers, though availability may vary depending on your specific model. Before ordering, please verify your appliance's E-Nr model number, which you'll find on the rating plate inside the door frame, to confirm compatibility with this spare part.
Compatible with 1 model
Hose clamp
OEM: 10037063
# Bosch Dishwasher Hose Clamp (10037063) If your Bosch dishwasher is leaking or the hose has come loose, a worn or damaged hose clamp could be the culprit. Over time, these small but essential components can deteriorate, losing their grip and allowing water to escape from connection points. Replacing a faulty hose clamp is a straightforward repair that restores the watertight seal your dishwasher needs to function properly. This genuine OEM hose clamp (reference 10037063) is designed specifically for Bosch dishwashers and ensures you get the right fit for your model. Installation is rated as difficulty level 2, making it an achievable task for most DIY homeowners with basic tools. When fitting your new clamp, remember to position it over the hose connection point and tighten it evenly – avoid over-tightening, which can pinch the hose and cause future problems. Before placing your order, take a moment to verify your dishwasher's E-Nr model number, which you'll find on the appliance's documentation or rating plate. This ensures complete compatibility and prevents any disappointment on delivery.
Compatible with 1 model
Hose-fill
OEM: 00661785
# Siemens Dishwasher Hose-fill (00661785) If your Siemens dishwasher isn't filling with water properly or you've noticed leaks around the inlet area, a worn or damaged fill hose is likely the culprit. Over time, these hoses can crack, perish, or develop internal blockages, preventing water from reaching your dishwasher's spray arms and wash chamber. This genuine OEM replacement hose (reference 00661785) restores proper water flow and eliminates leaks, getting your dishwasher back to peak performance. Installation is straightforward, rated at difficulty level 2, making it an ideal DIY project for most homeowners. When fitting the new hose, ensure both the inlet valve connection and the dishwasher inlet are completely dry before attaching. This prevents water damage and helps the connection seal properly. Have a towel handy, as residual water may still be present in the system. Before ordering, verify your dishwasher's E-Nr model number matches this part's compatibility list. You'll find this number on the appliance's rating plate, usually inside the door edge. Ordering the correct part ensures a perfect fit and eliminates unnecessary returns.
Compatible with 1 model
Hose-fill
OEM: 12031419
# Hose-Fill for Bosch Dishwashers (OEM 12031419) When your Bosch dishwasher fails to fill with water properly, or you notice leaks around the water inlet area, a worn or damaged fill hose is often the culprit. This genuine replacement hose restores reliable water supply to your appliance, preventing further damage and getting your dishwasher back to full working order. This is a straightforward replacement job suitable for most DIY homeowners. With an installation difficulty rating of just 2 out of 5, you'll typically need only basic tools and around 30 minutes of your time. The most important practical tip is to turn off the water supply at the mains before you start, then disconnect the old hose carefully to avoid any spillage. The OEM reference number 12031419 ensures you're ordering the exact component your Bosch dishwasher needs. This genuine part is designed to withstand the regular pressure and temperature cycles of normal use, providing long-lasting reliability. Before placing your order, please verify your dishwasher's E-Nr model number against our compatibility list to guarantee this part will fit your specific machine.
Compatible with 1 model
Hose-fill
OEM: 12042721
# Bosch Dishwasher Fill Hose (12042721) If your Bosch dishwasher isn't filling with water or is leaking around the inlet area, a worn or damaged fill hose is likely the culprit. Over time, these hoses deteriorate due to water pressure, temperature fluctuations, and general wear, eventually causing performance issues or water damage beneath your appliance. The OEM reference 12042721 is a genuine Bosch replacement hose designed to restore reliable water supply to your dishwasher. Installation is straightforward, rated at difficulty level 2, making it an ideal DIY project for most homeowners. Simply turn off the water supply, disconnect the old hose from both the inlet valve and water tap connection, then reverse the process with your new part. A helpful tip: when reconnecting, ensure you hand-tighten the compression fittings firmly but don't over-tighten, as this can damage the threads. Use a small amount of plumber's tape on threaded connections for a watertight seal. This part suits various Bosch dishwasher models. Before ordering, please verify your appliance's E-Nr model number, which you'll find on the manufacturers label inside your machine, to confirm compatibility.
Compatible with 1 model
Outlet hose
OEM: 00668114
# Bosch Dishwasher Outlet Hose (00668114) Water pooling beneath your dishwasher or leaks during the wash cycle usually point to a worn or damaged outlet hose. This essential component carries used water away from your appliance, and over time, cracks, splits or general deterioration can cause drainage problems that leave your kitchen floor at risk. Replacing the outlet hose is a straightforward repair that most DIY homeowners can tackle in under an hour. This genuine OEM part, reference 00668114, is designed specifically for Bosch dishwashers and ensures reliable water evacuation with every cycle. Installation difficulty is rated at level 2, meaning you'll need basic tools and confidence, but no specialist knowledge. A helpful tip when fitting your new hose: ensure you position any clips or brackets securely to prevent the hose from sagging, which could trap water and defeat the purpose of the replacement. Before ordering, verify your dishwasher's E-Nr model number against our compatibility list to guarantee this part is correct for your machine. This simple check prevents returns and gets your appliance working properly again.
Compatible with 1 model
Aquastop Safety Inlet Hose
OEM: 00263690
# Aquastop Safety Inlet Hose Water leaks around your dishwasher's inlet connection are a sign that the hose has worn out or failed. The Aquastop Safety Inlet Hose (OEM reference 00263690) is the replacement you need to stop pooling water and restore reliable operation to your Bosch or Siemens dishwasher. This safety hose features built-in protection that automatically shuts off water flow if a leak is detected, giving you extra peace of mind against water damage. Over time, hoses can deteriorate from repeated pressure cycles, temperature changes and mineral deposits, making replacement a straightforward maintenance job. Installation difficulty is rated at 2 out of 5, so most confident DIY homeowners can tackle this themselves. When fitting the new hose, make sure both connection points are fully tightened but avoid over-tightening, which can damage the fittings. Give each connection a gentle tug once installed to confirm they're secure. Before ordering, verify your dishwasher's E-Nr model number, which you'll find on the appliance's information label. This ensures complete compatibility and hassle-free fitting.
Compatible with 0 models
Drain Hose
OEM: 00266916
# Drain Hose for Bosch and Siemens Dishwashers Water pooling at the bottom of your dishwasher or slow drainage during the wash cycle usually points to a blocked or damaged drain hose. Over time, this essential component can deteriorate, crack, or become kinked, preventing water from flowing away properly. Replacing it is often the quickest way to restore your appliance to full working order. This genuine OEM drain hose, reference 00266916, is designed specifically for Bosch and Siemens dishwashers and offers reliable performance you can trust. Installation is straightforward and requires minimal DIY experience, typically taking just fifteen to twenty minutes with basic tools. When fitting the new hose, make sure it isn't bent at sharp angles once connected, as this can restrict water flow and cause the same problem to recur. Route it gently away from the dishwasher to your waste outlet. Before ordering, please verify your appliance's E-Nr model number, which you'll find on the information label inside your dishwasher door. This ensures complete compatibility and a perfect fit for your specific model.
Compatible with 0 models