Spare parts category
cable
cable spare parts for Bosch and Siemens dishwashers. All 27 parts have verified OEM compatibility data.
27 parts · All OEM-verified
Cable strap
OEM: 00041270
# Cable Strap for Bosch and Siemens Dishwashers If your dishwasher cables are becoming loose or damaged, a worn cable strap is likely the culprit. This simple but essential component keeps internal wiring secure and protected from wear and friction. Over time, cable straps can crack, perish or fail entirely, leaving your dishwasher vulnerable to electrical issues and potential safety hazards. This genuine OEM cable strap (reference 00041270) is designed specifically for Bosch and Siemens dishwashers, ensuring perfect compatibility and reliability. It's straightforward to install, rated at difficulty level 2, making it an ideal DIY repair for most homeowners. The replacement typically takes just 15 to 20 minutes. When installing your new cable strap, take a moment to inspect the surrounding cables for any additional damage whilst you have access to this area. If other cables appear worn or brittle, address them now to prevent future breakdowns. Before ordering, please verify your dishwasher's E-Nr model number, which you'll find on the appliance's rating plate. This ensures you're purchasing the correct part for your specific machine and guarantees hassle-free installation.
Compatible with 6 models
Cable clip
OEM: 11052464
# Cable Clip for Bosch and Siemens Dishwashers If your dishwasher has loose or damaged internal cables, this replacement cable clip is the straightforward solution you need. Over time, cable clips wear out or break, allowing wiring to shift position inside the appliance. This can lead to poor connections, electrical faults, or even complete failure of your dishwasher. This genuine OEM cable clip (reference 11052464) is designed specifically for Bosch and Siemens dishwashers, ensuring perfect compatibility and reliable performance. The installation difficulty is rated at just 2 out of 10, making it an ideal DIY fix for most homeowners without requiring professional engineer assistance. When fitting the new clip, ensure you've completely disconnected the power supply from your dishwasher and allow any residual electricity to discharge before handling internal components. This simple safety step takes just a moment but significantly reduces any risk during installation. The cable clip addresses general wear and failure issues, restoring secure cable management within your machine. Before ordering, please verify your dishwasher's E-Nr model number matches this part's compatibility to ensure you receive exactly what you need.
Compatible with 5 models
Cable harness
OEM: 10006137
# Cable Harness for Bosch and Siemens Dishwashers When your dishwasher stops responding to controls or shows intermittent electrical problems, a worn or damaged cable harness is often the culprit. Over time, the internal wiring can deteriorate due to heat exposure and vibration, causing connection failures that leave your appliance unusable. This genuine replacement cable harness (OEM reference 10006137) restores reliable power distribution throughout your dishwasher's control systems. It's compatible with most Bosch and Siemens models, making it an essential repair part for common electrical faults. Installation difficulty rates at just 2 out of 10, so most confident DIY homeowners can tackle this replacement themselves. A helpful tip: before disconnecting the old harness, take a photograph of the wire positions to ensure accurate reconnection and avoid confusion during reassembly. The job typically takes under an hour once you've accessed the control panel area. You'll need only basic tools and a steady hand to secure the new harness properly. Before ordering, always verify your dishwasher's E-Nr model number matches the compatibility list for this part. You'll find this number on the appliance's rating plate inside the door edge.
Compatible with 5 models
Cable harness
OEM: 10006138
# Cable Harness for Bosch and Siemens Dishwashers If your dishwasher has stopped working or is behaving erratically, a faulty cable harness could be the culprit. Over time, internal wiring can deteriorate due to heat exposure and moisture, causing poor electrical connections or complete loss of power to essential components. This genuine OEM cable harness (reference 10006138) restores reliable power delivery throughout your appliance, getting your dishwasher back to full working order. This replacement part is compatible with most Bosch and Siemens dishwasher models and rates as a straightforward installation job for confident DIY homeowners. The difficulty level is just 2 out of 10, meaning you won't need specialist tools or extensive appliance knowledge to complete the repair. When installing, take a photo of the original harness routing before removal so you can replicate the exact path—this prevents accidental damage to nearby components and ensures optimal performance. Before ordering, always verify your dishwasher's E-Nr model number, as compatibility can vary between models. You'll find this number on the appliance's rating plate, usually located inside the door edge.
Compatible with 5 models
Cable harness
OEM: 10006141
# Cable Harness for Bosch and Siemens Dishwashers If your dishwasher has stopped working or is behaving erratically, a worn or damaged cable harness could be the culprit. This essential component carries power and signals throughout your appliance, and over time it can deteriorate due to heat exposure and general wear. When the harness fails, your dishwasher may lose power entirely or experience intermittent faults that seem impossible to diagnose. This genuine OEM cable harness (reference 10006141) is designed specifically for Bosch and Siemens dishwashers, ensuring perfect compatibility and reliable performance. Installation is straightforward, rated at difficulty level 2, making it an achievable project for most DIY homeowners with basic tools and a bit of patience. When you're installing the new harness, take a photograph of the existing connections before disconnecting anything. This simple step saves considerable frustration when reconnecting the new component and ensures you don't accidentally reverse any plugs. Before placing your order, please verify your dishwasher's E-Nr model number, which you'll find on the rating plate inside the door edge. This confirms compatibility and prevents unnecessary returns.
Compatible with 5 models
Cable harness
OEM: 10006142
# Cable Harness for Bosch and Siemens Dishwashers When your dishwasher stops responding or displays intermittent faults, a worn or damaged cable harness is often the culprit. Over time, the internal wiring deteriorates due to heat, vibration and moisture exposure, causing poor electrical connections and complete breakdowns. This genuine replacement cable harness (OEM reference 10006142) restores reliable power distribution throughout your dishwasher, getting it back to full working order. This part fits most Bosch and Siemens dishwashers and is rated as a straightforward DIY replacement, requiring only basic confidence with simple electrical components. Most homeowners complete the installation in under an hour. Before you begin, take a photograph of the existing cable harness layout. This makes reconnection far simpler and eliminates any guesswork during reassembly. Most cable failures occur when connectors aren't fully seated, so ensure each connection clicks firmly into place. Always verify your dishwasher's E-Nr model number before ordering to guarantee compatibility with your specific appliance. You'll find this reference on the rating plate inside the door edge.
Compatible with 5 models
Cable harness
OEM: 10006143
# Cable Harness for Bosch and Siemens Dishwashers When your dishwasher stops responding to controls or displays electrical faults, a worn or damaged cable harness is often the culprit. Over time, constant heating cycles and vibrations can cause internal wiring to deteriorate, leading to poor connections and complete appliance failure. This replacement cable harness (OEM reference 10006143) restores reliable electrical connections throughout your dishwasher, getting your machine back to full working order. It's compatible with most Bosch and Siemens models and represents a straightforward fix for DIY homeowners. Installation difficulty is rated at level 2, meaning you'll need basic tools and roughly an hour of your time. Before disconnecting anything, take a photograph of the original harness routing—this simple step ensures you reconnect everything correctly and avoid tangled wires that could cause future problems. This is a genuine OEM part, so you can be confident it meets manufacturer standards. Always verify your dishwasher's E-Nr model number before ordering to ensure complete compatibility with your specific appliance.
Compatible with 5 models
Cable harness
OEM: 10006145
# Cable Harness for Bosch and Siemens Dishwashers When your dishwasher fails to power on or displays intermittent electrical faults, a worn or damaged cable harness is often the culprit. Over time, the internal wiring degrades due to heat exposure and constant vibration, leading to poor connections and complete breakdowns. This genuine replacement cable harness (OEM reference 10006145) restores reliable power delivery throughout your machine. Compatible with most Bosch and Siemens dishwashers, this part is straightforward to install, rated at difficulty level 2. You'll typically access it by removing the side panel and disconnecting the old harness from the control board and motor connections. When fitting the new cable, take care to route it away from sharp edges and moving components, securing it with the original clips to prevent vibration damage. This is a genuine part engineered to original specifications, ensuring your dishwasher operates safely and efficiently once more. Most DIY homeowners can complete the replacement in under an hour with basic tools. Before ordering, please verify your dishwasher's E-Nr model number matches our compatibility list to guarantee a perfect fit.
Compatible with 5 models
Cable harness
OEM: 10006147
# Cable Harness for Bosch and Siemens Dishwashers If your dishwasher has stopped working or is behaving erratically, a worn or damaged cable harness could be the culprit. This essential component carries power and signals throughout your appliance, and over time, it can suffer from general wear and failure that leaves your dishwasher unable to operate properly. This genuine OEM cable harness (reference 10006147) is designed to restore full functionality to compatible Bosch and Siemens dishwashers. It's a straightforward replacement that most DIY homeowners can tackle confidently, with an installation difficulty rating of just 2 out of 10. Before you start, take a photograph of how the existing harness is connected so you can reattach the new one precisely. This simple step prevents frustrating mix-ups and ensures everything powers up correctly first time. This is a genuine replacement part that meets manufacturer standards, giving you reliable performance and peace of mind. However, before ordering, please verify your dishwasher's E-Nr model number matches this part's compatibility list. This quick check takes just a moment and guarantees you receive the correct component for your specific appliance.
Compatible with 5 models
Cable harness
OEM: 10012600
# Cable Harness for Bosch and Siemens Dishwashers If your dishwasher has stopped working or is displaying electrical faults, a worn or damaged cable harness could be the culprit. Over time, these connections deteriorate due to heat and moisture exposure, causing power delivery issues that leave your appliance unable to function properly. This genuine OEM cable harness (reference 10012600) is designed to restore reliable electrical connections in compatible Bosch and Siemens dishwashers. It's a straightforward replacement that most confident DIY homeowners can manage, with an installation difficulty rating of just 2 out of 10. When fitting the new harness, take a moment to inspect the connection points for any signs of corrosion or damage before plugging in. Cleaning these areas with a dry cloth ensures optimal contact and longevity of your repair. This part addresses general wear and failure issues commonly seen in older machines, making it an essential fix if you're experiencing intermittent power problems or complete electrical failure. Before ordering, please verify your dishwasher's E-Nr model number to confirm compatibility with this part.
Compatible with 5 models
Cable
OEM: 00645125
# Cable for Siemens and Bosch Dishwashers When your dishwasher stops responding to controls or won't turn on, a worn or damaged cable is often the culprit. Over time, internal wear and exposure to heat and moisture can degrade the wiring, leaving you with an appliance that simply won't function. This replacement cable (OEM reference 00645125) restores the electrical connection your dishwasher needs to operate normally. Compatible with both Siemens and Bosch dishwashers, this genuine part guarantees reliable performance and safe operation. Installation difficulty is rated as 2 out of 10, making it an achievable DIY project for most homeowners with basic tools and a little patience. A practical tip: before disconnecting anything, take a photo of the cable arrangement so you can reconnect it precisely. This simple step prevents confusion during reassembly and ensures everything sits correctly. Make sure you verify your dishwasher's E-Nr model number before ordering, as cable specifications vary between models. Check the rating plate inside your door edge or the original paperwork to confirm compatibility and avoid ordering the wrong part.
Compatible with 4 models
Cable harness
OEM: 10006146
# Cable Harness for Bosch and Siemens Dishwashers A faulty cable harness can leave your dishwasher unable to power key components, causing it to stop working altogether. This internal wiring loom gradually deteriorates through normal use and heat exposure, eventually breaking connections that your appliance depends on. This genuine replacement cable harness (OEM reference 10006146) restores reliable electrical connections throughout your dishwasher. It's designed specifically for Bosch and Siemens models, ensuring perfect compatibility with your machine. The installation difficulty rating of 2 means most confident DIY homeowners can manage this repair with basic tools. When fitting the harness, take a photo of the original connections before disconnecting anything. This simple step helps you reconnect everything correctly and saves considerable frustration later. This part addresses general wear and failure issues that develop over time, making it an ideal solution if your dishwasher has lost power or specific functions have stopped responding. Before ordering, verify your machine's E-Nr model number, as this ensures you're purchasing the correct harness for your exact dishwasher model.
Compatible with 4 models
Cable
OEM: 00633977
# Dishwasher Cable (00633977) When your Siemens or Bosch dishwasher stops working, a worn or damaged cable could be the culprit. Over time, electrical cables deteriorate through regular use, potentially causing your appliance to lose power or fail to operate entirely. Replacing a faulty cable is often the quickest way to get your dishwasher running again. This genuine OEM cable (reference 00633977) is designed specifically for Siemens and Bosch dishwashers, ensuring perfect compatibility and reliable performance. Installation difficulty is rated at level 2, making this a manageable DIY repair for most homeowners with basic electrical knowledge. When fitting your new cable, take time to route it carefully away from moving parts and heat sources within the appliance. This simple precaution helps prevent future damage and extends the cable's lifespan considerably. Before ordering, please verify your dishwasher's E-Nr model number on the appliance's rating plate. This ensures you're purchasing the correct part for your specific model, saving time and frustration during installation.
Compatible with 3 models
Cable harness
OEM: 10006842
# Cable Harness for Bosch and Siemens Dishwashers When your dishwasher stops responding to controls or displays intermittent faults, a worn or damaged cable harness could be the culprit. Over time, the internal wiring deteriorates through constant use, causing loose connections and electrical failures that leave your appliance unable to function properly. This genuine OEM cable harness (reference 10006842) restores reliable power distribution throughout your Bosch or Siemens dishwasher, getting your machine back to full working order. It's a straightforward replacement that most competent DIY homeowners can tackle in under an hour, with an installation difficulty rating of just 2 out of 10. Before you start, take a clear photograph of how the existing harness connects to its terminals, as this makes reassembly much simpler. Disconnect the power supply first and take your time reconnecting each wire to ensure proper contact. This is an original equipment manufacturer part, so you're guaranteed compatibility and quality. However, always verify your dishwasher's E-Nr model number matches before ordering, as this ensures you receive the correct component for your specific appliance.
Compatible with 3 models
Cable harness
OEM: 10006843
# Cable Harness for Bosch and Siemens Dishwashers When your dishwasher stops responding to controls or displays intermittent electrical faults, a worn or damaged cable harness is often the culprit. Over time, the internal wiring can deteriorate due to heat exposure and vibration, causing connection failures that leave your appliance unable to function properly. This genuine OEM cable harness (reference 10006843) restores reliable electrical connections throughout your dishwasher, making it an essential replacement for Bosch and Siemens models. It's straightforward to install, rated at difficulty level 2, so most confident DIY homeowners can tackle it without calling an engineer. When replacing the harness, take a photograph of the original connector positions before disconnecting anything. This simple step prevents confusion during reassembly and ensures every wire reconnects correctly first time. This part addresses general wear and failure issues that develop naturally over years of use. Before ordering, verify your dishwasher's E-Nr model number matches the compatibility information. You'll find this on your appliance's rating plate, usually inside the door edge. Confirming this detail guarantees you receive the correct part for your specific model.
Compatible with 3 models
Cable harness
OEM: 10014829
# Cable Harness for Bosch and Siemens Dishwashers If your dishwasher has stopped working or is showing intermittent faults, a faulty cable harness could be the culprit. Over time, these vital connectors can deteriorate due to heat exposure and vibration, causing your appliance to lose power or fail mid-cycle. Replacing the cable harness is often the simple solution to getting your dishwasher running again. This genuine cable harness (OEM reference 10014829) is compatible with most Bosch and Siemens dishwasher models and is straightforward enough for a confident DIY repair. Installation difficulty is rated at just 2 out of 10, meaning most homeowners can tackle this job without specialist knowledge. When installing, take a photo of the original wiring before disconnection. This simple step ensures you reconnect everything correctly and avoid any frustrating mistakes. The cable harness typically clips or bolts into place securely, and the whole job usually takes under an hour. Before ordering, please verify your dishwasher's E-Nr model number on the appliance's rating plate. This ensures you're purchasing the correct part for your specific machine.
Compatible with 3 models
Cable harness
OEM: 10022442
# Cable Harness (10022442) When your Bosch or Siemens dishwasher stops responding to controls or displays intermittent electrical faults, a worn or damaged cable harness is often the culprit. This essential component transmits power and signals throughout your appliance, and general wear can cause it to fail over time, leaving you with a non-functional machine. This genuine OEM cable harness (reference 10022442) is the direct replacement you need to restore your dishwasher to full working order. Compatible with most Bosch and Siemens models, it's a straightforward repair that many confident DIY homeowners can tackle themselves. The installation difficulty rating of 2 means you'll need basic mechanical confidence and a screwdriver, but it's far from complex. One helpful tip: before disconnecting the old harness, take a photograph of the connector positions so you can match them precisely when installing the new one. This simple step eliminates guesswork and ensures everything connects correctly first time. Before ordering, always verify your dishwasher's E-Nr model number to confirm compatibility. You'll find this on the appliance's rating plate, usually inside the door edge.
Compatible with 3 models
Cable
OEM: 10025138
# Cable (OEM Reference 10025138) When your Siemens or Bosch dishwasher fails to power on or stops mid-cycle, a worn or damaged cable is often the culprit. Over time, cables can deteriorate through general wear, causing electrical connection issues that leave your appliance completely non-functional. Replacing a faulty cable is usually a straightforward fix that gets your dishwasher back in working order. This replacement cable (OEM reference 10025138) is designed to restore the electrical connection in compatible Siemens and Bosch models. The installation difficulty rating of 2 means most DIY homeowners can manage this job with basic tools and a little patience. Before you start, take a photograph of how the old cable connects to ensure you reinstall it correctly. This simple step prevents confusion and saves time during reassembly. The job typically takes under an hour once you've gained access to the component. To ensure you're ordering the correct part for your machine, please verify your dishwasher's E-Nr model number before placing your order. You'll find this on the appliance's data plate, usually located inside the door edge or on the side wall.
Compatible with 2 models
Cable
OEM: 12010603
# Cable (12010603) for Siemens & Bosch Dishwashers If your dishwasher has stopped working or is behaving erratically, a worn or damaged cable could be the culprit. Cables deteriorate over time through normal use, and when they fail, they'll prevent your appliance from powering on or operating properly. This genuine replacement cable (OEM reference 12010603) is compatible with both Siemens and Bosch dishwashers, making it a reliable solution for restoring your appliance to full working order. The installation difficulty is rated as moderate, meaning most competent DIY homeowners can tackle this repair with basic tools and a little patience. When fitting your new cable, take care to route it away from sharp edges and ensure all connections are fully seated before reassembling the dishwasher. This simple precaution will prevent future damage and guarantee a secure fit. Before placing your order, verify that your dishwasher's E-Nr model number matches this part's compatibility. You'll find the E-Nr on the appliance's nameplate, usually located inside the door edge or on the side wall. Checking this detail beforehand will save you time and ensure you receive exactly the right component.
Compatible with 2 models
Cable harness
OEM: 10021189
# Cable Harness for Bosch & Siemens Dishwashers When your dishwasher refuses to start or shows intermittent electrical faults, a worn or damaged cable harness is often the culprit. Over time, the internal wires can deteriorate, break down, or lose their connections, leaving your appliance unable to function properly. This genuine OEM cable harness (reference 10021189) restores the vital electrical pathway your dishwasher needs to operate reliably. This replacement harness is compatible with both Bosch and Siemens dishwashers, making it a versatile solution for many households. The installation difficulty is rated at level 2, meaning it's straightforward enough for most DIY enthusiasts with basic mechanical confidence and a screwdriver. When fitting the new harness, take a photograph of the original wiring configuration before disconnecting anything. This simple step eliminates guesswork during reassembly and ensures every connection goes back in exactly the right place. Before placing your order, please verify your appliance's E-Nr model number, which you'll find on the manufacturer's plate inside your dishwasher. This guarantees compatibility and prevents unnecessary returns.
Compatible with 2 models
Cable harness
OEM: 10021191
# Cable Harness for Bosch and Siemens Dishwashers When your dishwasher stops responding to controls or displays intermittent faults, a faulty cable harness is often the culprit. This essential component carries electrical signals throughout your appliance, and general wear over time can cause connections to fail, leaving you with an appliance that won't start or function properly. This genuine replacement cable harness (OEM reference 10021191) is compatible with most Bosch and Siemens dishwasher models and restores reliable electrical connectivity. The installation difficulty is rated at level 2, making it manageable for most confident DIY homeowners with basic tools. Before you begin, take a photograph of the existing harness routing so you can replicate the same path when installing the new one. This simple step prevents pinching or damage to the cables and ensures proper operation. This spare part typically arrives in good condition and includes all necessary connectors. However, before ordering, please verify your dishwasher's E-Nr model number on the appliance's rating plate to confirm compatibility. This ensures you receive the correct part for your specific model.
Compatible with 2 models
Cable harness
OEM: 10027383
# Cable Harness for Bosch & Siemens Dishwashers Is your dishwasher behaving erratically or refusing to start altogether? A worn or damaged cable harness could be the culprit. Over time, the internal wiring that connects your dishwasher's components can deteriorate, leading to intermittent faults or complete failure. This genuine replacement cable harness (OEM reference 10027383) restores proper electrical communication throughout your machine, getting it back to reliable operation. This part is compatible with Bosch and Siemens dishwashers, making it a straightforward solution if you've identified wear-related issues. The installation difficulty is rated at level 2, meaning most confident DIY homeowners can tackle this repair with basic tools and patience. When fitting the new harness, take a photograph of the original wiring layout before disconnecting anything. This simple step saves frustration and ensures you reconnect everything correctly, preventing any electrical mishaps. Before ordering, always verify your dishwasher's E-Nr model number against our compatibility list. You'll find this number on the appliance's data plate, usually located inside the door frame. Confirming this detail guarantees you receive the correct part first time.
Compatible with 2 models
Dishwasher Mains Power Cable
OEM: 12005926
# Dishwasher Mains Power Cable If your Bosch dishwasher won't power on or keeps cutting out unexpectedly, a faulty mains power cable could be the culprit. Over time, cables can deteriorate due to heat exposure and repeated use, leading to poor electrical connections or complete failure. Replacing the cable is often a straightforward fix that restores your appliance to full working order. This genuine OEM mains power cable (reference 12005926) is designed specifically for Bosch dishwashers and ensures safe, reliable operation. Installation difficulty is rated at just 2 out of 10, making it a manageable DIY task for most homeowners. Before you start, ensure the dishwasher is switched off at the wall and allow it to cool if it's been recently used. Take a photo of the existing cable connections before disconnecting anything, as this makes reassembly far simpler and reduces the risk of wiring mistakes. Please verify your dishwasher's E-Nr model number against the compatibility information before ordering, as this ensures you receive the correct replacement part for your specific appliance.
Compatible with 2 models
Cable
OEM: 12033239
# Bosch Dishwasher Cable (12033239) Is your Bosch dishwasher failing to power on or showing intermittent electrical issues? A worn or damaged cable could be the culprit. Over time, cables can deteriorate through normal use, exposure to moisture, and repeated flexing, leading to complete failure or safety hazards. This genuine replacement cable (OEM reference 12033239) restores reliable power delivery to your appliance and is designed specifically for Bosch dishwashers. The installation difficulty rating of 2 means most confident DIY homeowners can tackle this repair without professional help. When fitting the new cable, make sure to disconnect the power supply completely at the circuit breaker before you begin. Take a photograph of the existing cable connections before removal so you can easily match them up with your replacement. This simple step prevents wiring errors and ensures everything reconnects properly. This is a straightforward repair that typically takes under an hour and can save you the cost of an engineer's visit. Before placing your order, verify your dishwasher's E-Nr model number matches the compatibility information for this part.
Compatible with 1 model
Cable harness
OEM: 10020160
# Cable Harness for Siemens Dishwashers When your Siemens dishwasher stops responding to button presses or displays won't light up, a worn or failed cable harness is often the culprit. This essential component carries power and signals throughout your appliance, and over time it can degrade through normal use. This replacement cable harness (OEM reference 10020160) restores the vital electrical connections your dishwasher needs to function properly. It's a straightforward repair that most competent DIY homeowners can manage, rated at difficulty level 2, without requiring specialist knowledge or expensive engineer callouts. Installation is fairly straightforward, but here's a practical tip: before disconnecting anything, take photographs of the existing harness routing and connections. This makes reassembly much simpler and ensures you don't accidentally trap cables or create kinks that could cause future problems. The part itself arrives ready to install with no modifications needed. You'll typically need just basic hand tools to complete the job. Before ordering, please verify your dishwasher's E-Nr model number against our compatibility chart to ensure this is the correct part for your specific machine.
Compatible with 1 model
Cable harness
OEM: 12033423
# Cable Harness for Bosch Dishwashers When your Bosch dishwasher stops responding to controls or displays electrical faults, a worn or damaged cable harness could be the culprit. This essential component carries power and signals throughout your appliance, and over time it can deteriorate from heat exposure and vibration, causing intermittent faults or complete failure. This genuine replacement cable harness (OEM reference 12033423) restores reliable electrical connections and gets your dishwasher back in working order. Installation difficulty sits at level 2, making it manageable for most DIY homeowners with basic mechanical confidence. Before you begin, locate the main power supply cable and take a photo of the existing harness connections—this proves invaluable when reconnecting terminals on the new part. You'll typically need just a screwdriver and roughly 30-45 minutes to complete the job. Always verify your dishwasher's E-Nr model number matches our compatibility information before ordering. You'll find this on the appliance's data plate, usually inside the door frame. This simple check prevents disappointment and ensures perfect fitment.
Compatible with 1 model
Main Wiring Harness
OEM: 00631288
# Main Wiring Harness for Bosch and Siemens Dishwashers When your dishwasher stops responding to controls or displays intermittent faults, a worn or damaged wiring harness is often the culprit. This essential component connects power and signals throughout your machine, and over time, the cables can degrade, causing your appliance to malfunction or stop working altogether. The OEM reference 00631288 is the genuine replacement harness designed for Bosch and Siemens dishwashers. Choosing an original part ensures compatibility and reliability, giving you confidence that your repair will last. This is a moderately challenging repair, rated 4 out of 5 for difficulty. Before you begin, take photos of the existing harness layout so you can reconnect everything correctly. Modern smartphones make this easy and invaluable when reassembling. The installation involves disconnecting the old harness and routing the new one through the same pathways within your dishwasher's cabinet. Take your time with this step to avoid pinching or damaging the new cables. Before ordering, please verify your dishwasher's E-Nr model number, as this harness may not be compatible with all models in the Bosch and Siemens range.
Compatible with 0 models